Yanko Design - Form Beyond Function

Yanko Design - Form Beyond Function

Link to Yanko Design

Spacecraft Carrier

Posted: 31 Jul 2013 08:51 AM PDT

The MKS-1 SLS concept was designed primarily as a launch-support for space rockets & suborbital vehicles, helping them reach their destination by first carrying them closer to the edge of our atmosphere. Adaptable guide-rails above the fuselage are configurable to a variety of different payloads, including pods for space tourism. Together, 11 next-gen engines, 8 ultra high-bypass turbofan engines, & 3 engines with adaptive versatile engine technology ensure precious cargo safely arrives at an altitude of 50k feet before 2nd launch.

The MKS-1 SLS would have an auto-generator electric energy system from heat energy conversion and from combustion of liquefied natural gas (also used for turbofan engines mixed with conventional combustible) to keep the avionic systems and the rocket’s combustible temperature in optimal conditions. It also would have a “hyper-lift” mechanical system to create a dynamic air flow controlled by a fly-by-wire system and on-board computers to prevent a possible stall situation.
The MKS is also built with advanced composite materials such as carbon laminate, carbon sandwich, activated carbon, aluminum, and titanium that are stress and fatigue resistant. Where it counts, low density sections on the exterior of the plane have extra capacity to resist the highest temperatures.

Designer: Oscar ViƱals

-
Yanko Design
Timeless Designs - Explore wonderful concepts from around the world!
Shop CKIE - We are more than just concepts. See what's hot at the CKIE store by Yanko Design!
(Spacecraft Carrier was originally posted on Yanko Design)

Related posts:

  1. Sporty Spacecraft
  2. Baby Carrier That Provides Privacy And Support
    


Wheels Of The Bus

Posted: 31 Jul 2013 03:54 AM PDT

Ok slight deviation, this time it's the wheels of a cycle and the value proposition is of course technical! The Charging Clip integrates a battery pack that can harness energy from the moving spokes of a cycle. What you need to do is clip the device to the cycle spoke and let physics and engineering take over. The drill is simple; you ride your bike, tank up the device and then juice your phone. So very easy!

Designers: Cheng-Kuei Fan, Hui-Chuan Ma & Yan-Jang Cheng

-
Yanko Design
Timeless Designs - Explore wonderful concepts from around the world!
Shop CKIE - We are more than just concepts. See what's hot at the CKIE store by Yanko Design!
(Wheels Of The Bus was originally posted on Yanko Design)

Related posts:

  1. Sex on Wheels, Vandenbrink GTO
  2. Gun on Wheels
  3. Lillies on Wheels
    


Totem Part Two

Posted: 31 Jul 2013 03:47 AM PDT

A new twist to the old Stackable Cup, this new Tilt Cup has a clipped edge that enhances drying. When you place the glass upside down, the water trickles and drains out through the gap created by the clipped edge. The tilted angle also enhances the weight balance so the cup can stand up by itself when overturned. I think this will work!

Designer: Huang Shi-hao

-
Yanko Design
Timeless Designs - Explore wonderful concepts from around the world!
Shop CKIE - We are more than just concepts. See what's hot at the CKIE store by Yanko Design!
(Totem Part Two was originally posted on Yanko Design)

No related posts.

    


Feel the Click

Posted: 31 Jul 2013 12:01 AM PDT

The Feeling Mouse, designed specifically for the hearing impaired, appeals to the user’s tactile senses to emphasize the all-important “click” that’s crucial in operating the device. When the user presses down on the mouse, raised bumps slightly protrude through designated holes where the user’s fingers rest to signal the “click.” It’s a simple solution, but incredibly useful for those missing out on this subtle queue.

Designer: Si Hun Lee

-
Yanko Design
Timeless Designs - Explore wonderful concepts from around the world!
Shop CKIE - We are more than just concepts. See what's hot at the CKIE store by Yanko Design!
(Feel the Click was originally posted on Yanko Design)

Related posts:

  1. 1-Click Theft Protection
  2. With Click & Grow Everyone Can Become A Gardener
  3. Lemme See How You Feel
    


This lil thing will make you a pro!

Posted: 31 Jul 2013 12:01 AM PDT

Following the trend of wearable fitness trackers, the AWA sport sensor goes beyond the functionality of wrist-bound devices and makes it possible to record and compare physical data from almost any of your favorite sports. Composed of aerospace-grade aluminum alloy, it can be attached to anything from a shoe to a fencing sabre and is lightweight enough that the user won’t even notice it. Automatically synced wirelessly to your phone, it provides up-to-the-minute stats of your strength, speed and more!

Designer: Jerome Olivet

-
Yanko Design
Timeless Designs - Explore wonderful concepts from around the world!
Shop CKIE - We are more than just concepts. See what's hot at the CKIE store by Yanko Design!
(This lil thing will make you a pro! was originally posted on Yanko Design)

No related posts.

    


LinkWithin

Related Posts Plugin for WordPress, Blogger...